Installation Orientation of Ram Gooseneck Coupler with Square Tube

Updated 01/21/2021 | Published 01/19/2021

Question:

Bought a gooseneck coupler from you and need to know what orientation it should be welded on. Which side should the lock unlock handle be on. Forward, drivers side, passenger side or aft side. Thanks

asked by: Chris C

Expert Reply:

When installing the Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K # GCSQ-25008 or any square tube coupler, usually the outer tube is welded on so that the set screws face forward, which puts the latch at a 45 degree angle forward of the drivers side

expert reply by: Erik B