Replacement Slide-Out Gear Motor for Power Gear 524664

Question

Question:

I have a broken power gear motor pn524664 s\n 0607435897 off of a 2007 Gulfstream BT touring cruiser 5291. what can you tell me about common replacement numbers etc.?

asked by: Robert G

0

Expert Reply:

According to Lippert, the correct replacement gear motor for your Power Gear 524664 is part # LC368221.

I've linked to a product description video for the replacement gear motor.

expert reply by: Mike L

0

Answer 1

Unfortunately when the gear box breaks the only option is going to be replacement. You could try taking it to a engine repair shop, but you'd most likely end up spending much more than the motor is worth on replacement parts, if they're even…

view full answer...

Answer 2

From what I could find on the Fastec 44610, it requires a cut-out of 5-1/4" tall x 2-3/4" wide. We do not have a lock option that matches up to that perfectly. The best option we have is the Bauer Products Rotary Latch #BA85FR which fits a…

view full answer...

Answer 3

Hey Mike, there isn't a way to get just the pump of the assembly you are in need of so the only solution would be the part #LC251910 that you referenced.

view full answer...

Answer 4

The Replacement Amber Lens for MC42AB Trailer Lights A42AB is designed for the Double Bullseye Trailer Clearance, Side Marker Light, Two-Bulb #MC42AB, and will not work for your Reflect-O-Lite 300, however I have another solution. Reflect-O-Lite has…

view full answer...

Answer 5

I reached out to my contact at Lippert who made Power Gear. The replacement motor you want is the Replacement Gear Motor for Lippert Components Single Rail Above Floor Slide-Outs #LC368221. This is the only direct replacement for your 524664 Power…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Slide-Out Gear Motor for Power Gear 524664

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching