Replacement Solar Charge Controller for Go Power Portable Solar System

Question

Question:

I have Go Power GP-PSK-80 80W Portable Folding Solar Kit with 10 Amp Solar Controller 2 years old and it appears the controller failed after we went through a rain storm while camping. Can I just get a replacement controller?

asked by: Henry G

0

Expert Reply:

You can use the Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V # 34280503 to replace the solar controller on your Go Power 80W system.

expert reply by: Erik B

0

Answer 1

Hey Don; good question and no other parts - including any type of adapter plate or mounting plate - is needed to mount the 30 Amp Go Power PWM Solar Charge Controller with Bluetooth #GP76QR. The #GP76QR comes with screws and is ready to be mounted…

view full answer...

Answer 2

Hi David, thanks for reaching out! The older Go Power PWM-30 Solar Controller has been discontinued, but you can use the Go Power PWM Solar Charge Controller with Bluetooth #GP76QR along with the Installation Adapter Plate #GP86QR to replace it! I…

view full answer...

Answer 3

Sorry to hear about your controller! I went ahead and investigated this issue, and I discovered that if the controller of the Go Power Solar Panel #34282610 continuously blinks on and off with all icons, the #34280503 controller is receiving a…

view full answer...

Answer 4

There isn't a setting you can use on your Go Power solar controller for lithium batteries if it is not compatible, so you will need to upgrade your solar controller to one that is compatible. I'm not sure which solar power system you…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 8

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Replacement Solar Charge Controller for Go Power Portable Solar System

Continue Researching