How to Reinstall Tow Hook on a 2012 Jeep Patriot when Installing a Trailer Hitch

Updated 01/21/2013 | Published 01/20/2013

Question:

Is it possible to reinstall the tow hook during the installation of the Draw-Tite Hitch# 75712?

asked by: Ralph F

Expert Reply:

You can reinstall the tow hook if present when installing trailer hitch # 75712 on a 2012 Jeep Patriot. You will have to drive out the knurled neck bolts on the tow hook. Then you will need to drill out the holes to 5/8 of an inch. Use the hardware that comes with the hitch to attach the tow hook to the outside of the driver side frame. I have included a link to the installation instructions that explain this process. I have also linked a video that shows the rest of a typical installation.

If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a storage bag. For trailer wiring use # 118552. I have linked a video and instructions for the wiring as well.

expert reply by: Michael H