Trailer Axle Spring Hanger Bracket Mounting Location
Updated 12/17/2020 | Published 12/15/2020
Question:
Cual piese es la que va al frente del trailer . Which one is the one in front of the trailer.
asked by: Alex
0
Expert Reply:
The front, center, and rear hanger brackets for the Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 48-1/2" Axle Spacing Item # HAP-103-203-03 are as follows:
6-1/4" Tall front hangers with 1" bolt holes
4-1/8" Tall center hangers with 1-1/8 bolt holes
7-11/16" Tall rear hangers with 1/2" bolt holes
expert reply by:
Shane H
0
Product Page this Question was Asked From
Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 48-1/2" Axle Spacing
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 3 Inch
- Tandem Axle
- Redline
more information >
Continue Researching
- Q&A: Axle Placement and Suspension System for 20,000 lb Bumper Pull Trailer
- Q&A: How to Determine if Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2 Slipper Springs Will Work
- Q&A: Trailer Suspension Parts Needed to Increase Trailer Capacity from 7000 to 10000 lbs Gross Weight
- Q&A: Lippert Angled Bracket Dimensions for Bracing Spring Hangers
- Q&A: Parts to Convert 5-Spoke Utility Hub to Modern Style Hub on 10K Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can 10K Leaf Springs be Upgraded to 3 Inch Wide 12K Springs for Gooseneck Trailer
- Q&A: Where To Install SumoSprings Trailer Helper Springs TSS-106-40 On Trailer With Tandem Axles?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Raise Your Travel Trailer Height