Availability of Rotopax Mounting Kit for Yakima Overhaul HD 8001167

Question

Question:

Hi, For Yakima part 8001167, Rototrax mounting kit, are these available? Thank you !

asked by: Brian S

1

Helpful Expert Reply:

We have the kit you are looking for with the part # Y01167 which is the same as part number 8001167.

expert reply by: Jameson C

1

Answer 1

The Replacement Top Channel Crossbar Infill for Yakima HD Style Crossbars #Y33KV is the Yakima 8881036 and the correct insert for your Yakima HD Crossbars #Y01158. The Replacement Top Infill #Y01166 is the Yakima part number 8001166 which fits both…

view full answer...

Answer 2

Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions so either will fit in the other but the profile of the…

view full answer...

Answer 3

Yes, the Rotopax Mounting Kit #Y01167 will work but the backing plate may be a little too long for the top slot on the Yakima LockNLoad #Y05044-39. We can compensate for this though. We can either put the backing plate in the desired part of the…

view full answer...

Answer 4

Yes, since the T-slots of Thule racks and Yakima racks are the exact same you can use the Rotopax Mounting Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks #Y01167 in the Thule tracks.

view full answer...

Answer 5

Hey Kirk, for your 2024 Toyota Tundra the Torklift Camper Tie Downs part #TL32SV are a confirmed fit but for just the front tie downs you'd want the part #TL57MV.

view full answer...

Answer 6

Hey Donald! I'm assuming you're saying you have the deck rail system on your 2024 Tundra. Is that correct? Assuming it is, and you have the 5-1/2' bed, the Access Vanish Soft, Roll-Up Tonneau Cover #A28GW you looked at is the right one to…

view full answer...

Answer 7

Hi David, There is an option for bump stops for your 2024 Toyota Tundra with a 3-1/2 inch lift by using Timbrens, you'll just need a spacer kit and some extra spacers to go with it. So what you can use is the Timbren Suspension Enhancement System…

view full answer...

Answer 8

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 9

Hey Jerry, you would not need to use any additional spacers with the Timbren kit part #T45MR that fits your 2024 Toyota Tundra SR5. Since your truck is all stock and this kit was designed to fit your vehicle no additional spacers would be required.

view full answer...

Answer 10

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 11

Hey Dave, thanks for reaching out. The BAKFlip MX4 Hard Tonneau Cover #BAK99AV is the correct fit for your 2024 Toyota Tundra CrewMax SR5 with the 5.5' Bed. It clamps directly to the bed rails like the second installation method you mentioned.…

view full answer...

Answer 12

Great questions! Your Thule Hullavator Pro #TH898 will fit perfectly on the HD crossbars that come on the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855. I recommend using the T-Slot mounting method as the…

view full answer...

Availability of Rotopax Mounting Kit for Yakima Overhaul HD 8001167

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching