What is the Mounitng Hole Center on Center on the ComeUp Cable Tensioner
Updated 11/04/2020 | Published 11/01/2020
Question:
will part cu881087 work with a trail fx 8000.
asked by: John K
0
Expert Reply:
The ComeUp Cable Tensioner part # CU881087 has mounting holes that are 10" on center. This is a pretty common size but I would recommend checking your winch to see what the mounting holes are on it to make 100% sure it will bolt on.
expert reply by:
Randy B
0
Product Page this Question was Asked From
ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 winches
- Accessories and Parts
- Electric Winch
- Rigging
- Rope Tensioner
- ComeUp
more information >
Continue Researching
- Shop: ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 winches
- Video: Tensioner for Bulldog Winch Standard Series Truck Winches: The Breakdown
- Shop: Tensioner for Bulldog Winch Standard Series Truck Winches - 8,000 lbs to 12,000 lbs - Wire Rope
- Shop: Replacement Guide Bolt for Kodiak Calipers - Stainless Steel
- Q&A: Width of ComeUp Cable Tensioner for DV-12, DV-15, and DV-18 Winches # CU881087
- Q&A: Dimensions for Roller On Tensioner for Bulldog Winch # BDW34QR
- Q&A: Winch Tensioner Compatibility with Smittybilt X20 10,000 lb Winch
- Q&A: Winch Cable Tensioner for a 12K Badlands Winch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Bulldog Tensioner and Spring Replacement Availability
- Article: Trailer Lighting Requirements
- Q&A: Will The Tensioner For Bulldog Winches Work On A Smittybilt 9500 XRC Winch?
- Q&A: Overall Length of the Tensioner for Bulldog Winch Standard Series Truck Winch BDW20234