Is there a bearing Buddy that Measure 1.786 Inches
Updated 11/01/2012 | Published 10/30/2012
Question:
Do you have a b. buddy for 1.786? Seems no one carries that size.
asked by: Chuck P
Expert Reply:
The closest match bearing protectors we have will be either a 1.781 or 1,810. A 1.786 is not available. Make sure you are getting the most accurate measurement of the hub bore that you can. We use digital dial calipers to take these types of measurements. The outside diameter of the bearing protector is usually slightly larger than the hub bore so there is a tight fit.
If you do keep coming up with 1.786 the only option we have is grease cap # F001503 that you referenced. Bearing Buddy does make custom sizes but you would have to contact them directly.
Product Page this Question was Asked From
Fulton Grease Cap - 1.786" Outer Diameter - 1-9/16" Tall - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.79 Inch O.D.
- 1.79 Inch
- 2500 lbs Axle
- 3000 lbs Axle
- Fulton
more information >
Continue Researching
- Article: Holiday 2025 | Best Gifts for RVing
- Q&A: Can I use a different seal than what comes with DX22XR
- Q&A: Could Dexter 2,500 lb Axle Hub DX22XR Fit on 6 inch Long Spindle
- Q&A: Replacement Lens Needed for Light with SAE-P2-A98 On Lens
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: 6-Lug Hub & Drum For 2,200 lb Timbren Axle-Less Trailer Suspension
- Q&A: No Trailer Connection on Tekonsha P3 Brake Controller 90195 on a 2000 Toyota Tundra
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Q&A: Replacement Drum and Cable for Trailer Ramp
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Article: Trailer Maintenance Schedule