Replacement Antenna for Furrion FOS48TA-BL System

Question

Question:

I have a Furrion model is FOS48TA-BL wireless observation system and broke the antenna from teh LCD monitor. Does item # 772577 fit on that model? I did not see it listed as a replacement. If not,can you recommend an antenna for replacement for that model? Thank you

asked by: Christine H

0

Expert Reply:

Yes. The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems # 772577 will fit on your Furrion FOS48TA-BL.

expert reply by: Erik B

0

Answer 1

Yes, the Replacement Antenna for Furrion Vision S Wireless RV Camera System part #772577 will work with the Furrion Vision Wireless RV Backup Camera System part FOS48TA-BL.

view full answer...

Answer 2

We do have the correct replacement antenna for your Furrion FOD43TA-BL camera system, with the correct part being the following: - Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577

view full answer...

Answer 3

The #772577 antenna you'd looked at is indeed the correct replacement antenna for the monitor used by the Furrion FOD43TA-BL back up camera system.

view full answer...

Answer 4

We do have the correct replacement antenna for your Furrion FOD43TA-BL camera system. The correct part is the Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577.

view full answer...

Answer 5

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. This…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Dustin, thanks for reaching out! To replace the ECU on your Air Command F3 you need the part #F69VV for a single path but or the part #F58VV for a dual path system. Before you do that, have you tried the bubbly water test to see if you have any…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Antenna for Furrion FOS48TA-BL System

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching