Replacement Velcro Strip for Mopar Brand Tonneau Cover

Question

Question:

On my Mopar tonneau cover, the width of the hooks and channel is exactly 1 inch, but the part that slides in the channel is a bit larger. Will this 1inch work for me? Thanks,

asked by: Jon

0

Expert Reply:

The Truxedo # A60270 is the hook portion of the Velcro fastener, and is held on by self tapping screws that attach the strip to the side rail. As long as its one inch width fits in the available channel and the Velcro sewn into the tarp is the loop portion, there's no reason why this wouldn't work.

expert reply by: Mike L

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Jon, typically people replace the Dometic 310 RV toilet with the 410 which we have with the part #DMC64JF for a tan porcelain or the part #DMC44JF for a white porcelain. These are both standard height toilets with a round bowl and a slow close…

view full answer...

Answer 7

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Answer 8

Hello Michael, thanks for reaching out. It sounds like you are looking for an Extang Tonneau cover for your 2023 Ram 2500 with the RamBox. If so, we do have options for this. Take a look at the following: - Extang Trifecta 2.0 Soft Tonneau Cover -…

view full answer...

Answer 9

Hi Bruce! The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A63FR will indeed fit your 2021 GMC Serra 1500 SLT with the short bed and your toolbox. This can be used with toolboxes that measure 19" to 21" long, so you are good to go!…

view full answer...

Answer 10

Hey Sean, welcome back! We do have a video showing the B&W Turnoverball #BWGNRK1320 being installed on a 2022 Ram 3500. I have provided a link to the video below. We don't have any videos showing how to remove the factory puck system though,…

view full answer...

Replacement Velcro Strip for Mopar Brand Tonneau Cover

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching