Upgrading to Polyurethane Anti-Sway Bar Bushing On a 1998 Damon Daybreak

Updated 08/11/2020 | Published 08/07/2020

Products Featured in This Question

Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar

(30)

$186.25

Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar

(66)

$193.05

Question:

What are the dimensions of this part? I Know the ID for the part is 1.5. What I need is the Width between the two sides, the Overall height between the sides, and the depth. Please see the attached drawing for reference. I am trying to determine if it will fit my existing mounts on a 1997 Ford F53 Chassis under a 1998 Damon Daybreak on the rear axle. The mount brackets on my chassis are built much stronger than the kit that contains these bushings. My preference would be to use the original mount since it is much stronger.

asked by: Jimmy H

Helpful Expert Reply:

The Roadmaster Polyurethane Bushing Kit part # RM-4139-127 for front and part # RM-4139-125 for rear are correct for a 1998 Damon Daybreak. We do offer just the replacement bushings for these but they are not designed to be used with the factory brackets. If done so, you risk the chance of the bushing slipping out causing damage as well as risking losing control of the motorhome.

I don't have any dimensional drawing of the replacement bushings unfortunately.

expert reply by: Conner L