Programming Furrion Universal Remote Control

Question

Question:

This gives absolutely no instructions on programming the remote. How do you program the remote for stereos, fireplaces, etc?

asked by: Justin F

0

Expert Reply:

The Furrion # FR34FR remote should be ready to use on the TV and Stereo. The fireplace will need to be programmed based on the specific fireplace instructions. To switch to fireplace on the remote you hit TV again. I've attached some photos to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

I was able to track down the install and programming instructions for the remote that comes with the Furrion televisions and attached them to this page. The universal remote #FR34FR will work the same way.

view full answer...

Answer 2

According to the installation instructions for Furrion 2 Zone Stereo part #DV3100 after it finds the Bluetooth device, it shows the name of the Bluetooth device as DV3100-X. (X is determined by the number of the stereo unit you have). Once you select…

view full answer...

Answer 3

Furrion makes their own TVs. I have heard that if you have the 39 inch Furrion TV the code is 10054 and for the 24 or 29 inch models it is 10056. I have also heard that the codes for LG TVs sometimes work but not for everyone. This has been a fairly…

view full answer...

Answer 4

I was able to find some instructions for the Furrion remote control #FR34FR and these are shown in the attached images. This is all the documentation that is currently available.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Programming Furrion Universal Remote Control

Product Page this Question was Asked From

Continue Researching