Can the CE Smith Post-Style Guide-Ons That Install Outside of Frame Be Used On Pontoon Trailer
Updated 08/06/2020 | Published 08/04/2020
Question:
The boat ramp that we use to load and unload the boat is rather steep. When the trailer is backed far enough into the water , the inside guides disappear . Do you make guides that fit outside the pontoon boat and are maybe tall enough to stick out of the water 4 or 5 feet?
asked by: John H
Expert Reply:
The CE Smith Post-Style Guide-Ons for Boat Trailers part # CE27636 which install outside of the frame can be used on a pontoon boat trailer but you don't see this much because the floats are really large and usually stick out further. Therefore, you need to be sure the 19" of adjustment outside the frame will work with your boat/trailer combo. These will be the tallest available at 75".
Product Page this Question was Asked From
CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall - U-Bolt Hardware - 1 Pair
- Boat Trailer Parts
- Guides
- Post-Style Guide
- 75 Inch Tall
- Galvanized Steel
- PVC
- CE Smith
more information >
Continue Researching
- Article: Boat Trailer Guides: Which are the Best?
- Q&A: How do you mount CE Smith Post-Style Guide-Ons for Boat Trailers with a frame larger than 5 1/4"?
- Q&A: How Long Is The Base Bar Of The CE Smith Post Guide-Ons 75 Inches Tall?
- Q&A: PVC Outer Diameter of CE Smith Post-Style Guide-Ons
- Q&A: Replacement Light Caps for CE Smith Guide Ons
- Q&A: Fit & Wiring Length of CE Smith LED Light Kit for Post-Style Boat Guide-Ons CE27656A
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Q&A: Recommended Guide-Ons That Stick Out 24 Inches From Either Side Of Trailer
- Q&A: Will the CE Smith Post-Style Guide-Ons for Boat Trailers Work with Pontoon Boat Wider Than 19"
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Best Boat Trailer Jacks
- Article: Trailer Wiring Diagrams
- Article: Galvanized vs. Aluminum Trailers
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?