Are Coil SumoSprings a Good Option for 2018 Ford Expedition  

We can help you with towing mirrors for your 2018 Ford Expedition but the CIPA Custom Towing Mirrors #CM11550 (set of two) and #CM11551 (driver side) only fit the F-150 pickup. For your 2018 Expedition we do not have any custom-fit mirrors but we do…

If the SumoSprings #CSS-1168 is not picking up enough slack on your 2020 Ford Expedition, you can definitely add on to it. I spoke with SumoSprings and they said it is perfectly fine to add on another #CSS-1168 if the first one isn't getting all…

When it comes to installing a weight distribution hitch on your Jayco Mini Trailer weighing right under 5,000 pounds I recommend The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 pounds GTW, 1,000 pounds TW #EQ37100ET. When…

Yes, The ProPride 3P Weight Distribution Hitch #PR57QR is going to be a great improvement from your current Andersen hitch. The chains/friction chains are far better. Using this hitch will limit the side to side movement of your trailer caused by…

The ProPride 3P Weight Distribution Hitch w/ Sway Control for 2" Receivers #PR57QR ships out at 240 lbs so it's definitely a hefty piece of equipment. With that being said, weight distribution systems are designed to distribute the tongue…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…