Correct Trailer Tail Light for 6-7/8" Long Oval Cutout

Updated 07/24/2020 | Published 07/22/2020

Question:

I have an existing oval cutout for my red trailer lights. I need to replace 1 light unit and grommet. They are lost/gone. Existing hole size: 6-7/8inch by 2-3/4 Can you recommend a grommet and red trailer light combination that would work for my existing hole size. I reviewed the specs for a couple of your grommets, but I could not tell if any would work. I also looked at your surface mount lights, but it did not seem that any would work with my existing cutout size. Can you double check this and recommend a solution if possible. Thanks

asked by: Randall R

Expert Reply:

It seems like you have the standard 6-1/2" long oval trailer tail lights based on the photo and dimensions provided. Therefore I'd recommend upgrading to the Optronics Fleet LED Trailer Tail Lights part # TLL12RK since this would give you a matching set and they are also LEDs so they will be be brighter and last longer than incandescent.

expert reply by: Conner L