Size of Threaded Fittings on Dexter Hydraulic Flex Hose # 18018-SF
Updated 09/07/2012 | Published 09/03/2012
Question:
I need to know the size of the fittings. On these brake lines I am looking for 3/16 inch on both ends.
asked by: Blake B
0
Expert Reply:
The male and female fittings on the Dexter Hydraulic Flex Hose, part # 18018-SF, are a size of 3/8 - 24 UNF. The male end is a 90 degree fitting.
Normally the brake line tubing is 3/16-inch with 3/8-inch fittings on the ends. I do not have any fittings for a brake hose that will be 3/16-inch size.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Hydraulic Flex Hose - 18" long
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 1-1/2 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Components
- Dexter
more information >
Continue Researching
- Q&A: How Much of Each Gauge of Wire Fit Inside a Wire Loom Comfortably
- Article: Trailer Lighting Requirements
- Shop: Trailer Wiring
- Q&A: What Are The Wires Inside An Axle Used For?
- Q&A: How to Test Hydrastar Brake Actuator to See if it is Bad
- Q&A: How To Compress the Piston of a Dexter 12k HD Caliper After Rebuild
- Q&A: Replacement Dexter Brake Line 18018-SF Options
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: What is the Difference Between the Hydrastar HBA16 and HS381-8067?
- Q&A: Will the HydraStar Electric Over Hydraulic Actuator Part # HS381-8067 Work for Me
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision