What Replacement Steps do I Need for my 2010 Jayco Eagle 351 RLSA

Updated 07/02/2020 | Published 06/22/2020

Question:

Wondering if these are replacement for original. My dimensions are close. Looks like my measurements are: 13 1/2 deep. 16 inch high. 30 5/8 wide. Have 2 bolts towards upper front that are 27 1/8inch center to center. And about an inch back from front. The 30 5/8 wide is the opening. The inside of the box is 27 3/8. Looks like I have 2 additional bolts on outside of box to frame. Where your unit s flange on rear is on inside of box, mine flanges to outside, and that is where the 2 other bolts are.

asked by: Henry

Helpful Expert Reply:

It does sounds like from your description that these are the correct replacements for you. The mounting brackets are 27-1/8" wide which matches what you have. There are a few different ways to attach the steps like you said. There are the three top mounting points that will match your front bolt but there are also four on the outside (two front and two rear) that will allow you to attach them to the bracket on your Jayco Eagle. There are also three toward the middle of the back but these are rarely used.

expert reply by: Randy B