Recommended Trailer Brake Actuator for Saris A-60 Boat Trailer with 50MM Hitch Ball

Updated 06/02/2020 | Published 05/29/2020

Question:

Good morning! I live in Poland and I bought an old saris A-60 boat trailer with a hydraulic brake. My problem is that the trailer actuator has a diameter of 2 inches 50.8mm and the European ball in my audi has a diameter of 50 mm. There is a loose connection. I would like to point out that it is not possible to replace the hook ball in to 50.8mm in my car. My question is: is it possible to replace the old actuator with a new proper system? I found two: 1 Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs Item # T43397007K 2 Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 6,000 lbs Item # T2480000 Will they fit in to my trailer and will the hydraulic brakes still working properly? I attach photos of my actuator Yours faithfully,

asked by: Tomasz C

Expert Reply:

The Titan Zinc-Plated Brake Actuator part # T43397007K for 7K or the Titan Zinc-Plated Brake Actuator part # T2480000 for 6K are both options which fit a European 50mm hitch ball due to the handwheel mechanism. In regards to installation, so long as you have a 3" wide tongue they will both fit just fine.

expert reply by: Conner L