Will the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel Replaced Wheel With Smaller Pilot
Updated 05/28/2020 | Published 05/26/2020
Question:
looking at this trailer tire. My trailer has 4hole , but the pilot hole is 2.5.The new rims say the pilot hole is 2.81. Does that matter if the bolt holes line up?
asked by: Thomas M
Expert Reply:
In regards to pilot hole diameter, this really only matter if the wheels are hub piloted which most trailer wheels are not. If your wheels have beveled lug nut holes then they are lug piloted so as long as the hub bore on the wheel is larger than the hub you will be fine. Therefore, the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel part # AM30710 will work just fine.
Product Page this Question was Asked From
Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 5.30-12
- 12 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Continue Researching
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Recommendation for Upgrading to Larger Tires from 5.30-12 Tires on Trailer
- Q&A: What is Best Trailer Tire in Size 5.30-12
- Article: Trailer Tire Sizing
- Q&A: Can a 5.30-12 Trailer Tire Replace a 4.80-12 Trailer Tire Using the Same Rim
- Q&A: Comparing Two Tires of the Same Size For Spare Tire Use
- Q&A: Recommended 5.30-12 Tire And Wheel Combo For A John Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure a Trailer Axle
- Article: How To Read A Tire Sidewall
- Article: Trailer Maintenance Schedule
- Article: How to Accurately Measure Trailer Leaf Springs