Ladder Rack Compatible With Flush Mounted Tonneau Cover

Question

Question:

Is the Adarac item #A70490 in stock with you all? We were told it might be discontinued, but we are looking for a ladder rack that will work with a flush mount tonneau cover

asked by: Jacob E

0

Expert Reply:

The Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs # A70490 hasn't been discontinued but unfortunately will not work with many flush mounted tonneau covers. There is often an issue with tonneau covers because of the angle of the supports. Rolling covers and folding covers still have issue.

I recommend instead using Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500 lbs # DZ951550, the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-508, or the Adarac Pro # A4000964 which may be the best option for your tonneau.

expert reply by: Jason S

0

Answer 1

I do have a way that you can have both a ladder rack and a tonneau cover on your 2019 Ford F-150 with the 5-1/2' bed but unfortunately the only cover that worked with the Invis-A-Rack Ladder Rack #DZ951550 was the TruXedo Lo Pro QT Soft Tonneau…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 6

Hey Don, thanks for the information! That's a significant amount of sag and a pretty heavy trailer, I recommend the Hellwig Pro Series Helper Springs item #HE79FR for the higher 2,500 lbs capacity. I doubt you're driving around with your bed…

view full answer...

Answer 7

Hey Rick, thanks for reaching out. I see you already got your order placed but I wanted to make sure your question was answered. Yes, you can cut the 4-way plug off the #BLU92HR and wire it to a 6-pin or 7-pin plug. People actually do this all the…

view full answer...

Answer 8

Hey Mike, I double checked with Curt just now and their front hitch part #C31083 does fit your 2018 Ford F-150 with the 2.7 liter ecoboost! What are you planning on using the hitch for?

view full answer...

Answer 9

Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…

view full answer...

Answer 10

The Curt Front Mount Trailer Hitch Receiver part #C31083 will work just fine on your 2018 Ford F-150 with Eco Boost Engine. I checked with both Curt as well as past customers as well to confirm this for you. I have also attached a photo of what the…

view full answer...

Ladder Rack Compatible With Flush Mounted Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching