Replacement Motor and Fan for my Ventline Roof Vent

Updated 04/27/2020 | Published 04/23/2020

Products Featured in This Question

Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans

(697)

$42.95

Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Birch White

(292)

$31.94

Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents

(503)

$15.38

Question:

Looking for replacement parts for the overhead vent in the bedroom of my 2005 Forrest River Cardinal. The vent is 13.25 x 13.25 and has the model # VD0434 on the screen. This vent does not appear to have ever had a fan or motor in it. The bracket for fan and motor are in there, but there is no access hole for wiring. Although there is prep wiring to add an A/C unit adjacent to the vent opening.

asked by: Deb

Helpful Expert Reply:

To add a fan and motor you need three components. First you need the motor and the Replacement 12V DC Motor part # BVD0218-00 is the one. Second the blade for it which is the Replacement Fan Blade part # BVD0215-00. LAstly you need the controls for the Replacement Screen Frame with Screen, Rocker Switch, and Wire part # BVC0573-31R will give you what you need to control it.

As far as the 12 Volt it is likely there is 12 Volts at the A/C prewire if it does not exist you will need to use your own wire. This can be ran from a nearby 12 volt source up to the fan. You may be able to use the same area to bring your 12 volts in that the A/C pre wire uses.

expert reply by: Randy B