Length of Curt Towing Starter Kit for 2 Inch Trailer Hitches

Published 04/07/2020

Question:

Kyle was very helpful, but I don’t think I was clear enough with my question. I need the measurement from the center of the hitch pin hole to the welded on 1/2’ bar stock where it welds up to the square tubing on the top side.

asked by: Gary T

Expert Reply:

I'm not 100 percent sure I know the exact dimension you are referring to by center of the hitch pin hole to where you slide the mount up to the receiver, but I believe you are asking about the hitch pin hole to the rear of the Curt Towing Starter Kit for 2" Hitches # C45554.

It is approximately 2-1/2" from the center of the hitch pin hole to the rear of the ball mount, and 8-1/4" from the center of the hitch pin hole to the center of the hitch ball.

I have added links to a pair of video reviews for you to check out as well of the Curt Towing Starter Kit for 2" Hitches # C45554.

expert reply by: Kyle S

click to enlarge

Gary T.

4/7/2020

Kyle S.

4/7/2020

I see what you're saying, and the length is 3-1/4 inches from the center of the hitch pin hole to the welded on portion of the Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop # C45554.