Replacement Hydraulic Brakes for a 10K Boat Trailer

Published 03/26/2020

Products Featured in This Question

Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K

(406)

$211.29

Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet and Stainless - 6,000 lbs

(7)

$715.30

Question:

I have a tandem axle boat trailer for 28 foot boat. The actuator is a titan 10k lb hydraulic surge unit, the wheels are six bolts. What size brakes do I need for replacement. Would the axles be 5k lb each since its a tandem? Thus would I need surge brakes for 5k lb axle? Any assistance would be greatly appreciated.

asked by: Lewis T

Helpful Expert Reply:

Thank you for the info! I believe that you are correct and you have 2 axles with about a 5K weight rating. With that being the case it means for replacement surge brakes you need 12" brakes. If you use drum brakes then I recommend the Kit # AKFBBRK-7-D because they have a Dacromet finish that will them last longer in regards to water exposure.

If you happen to have disc brakes then I recommend the Kodiak Disc Brake Kit # K2HR526DS because it uses a combination of Dacromet finish and stainless steel for protection against water.

expert reply by: Jon G