Replacement for Magnetek 30 Amp Convertor

Question

Question:

I have a magnetek 30amp convertor thats shot and needs replacement, looks like the newer ones only go to 35amp? What should I use? Says Model 80 on the front of circuit center, havent taken converter out yet.

asked by: Josh

0

Expert Reply:

The Model 80 refers to the ac/dc distribution panel not the converter but what this does tell me is that you have a standalone converter. Therefore, if the converter is indeed 30 amps then the Progressive Dynamics Inteli-Power RV Converter and Battery Charger part # PD9130 will work wonderfully as a replacement.

expert reply by: Conner L

0

Answer 1

Hey Brad, for a replacement 25 amp converter that would work great in place of the Magnetek you'd want the WFCO part #WF36FR. This is also lithium compatible as well. How long have you had the Magnetek?

view full answer...

Answer 2

We don't offer the circuit boards for Magnetek power converters but I do recommend a complete replacement as more than just the circuit board could've been damaged. I recommend the Progressive Dynamics Inteli-Power RV Converter and Battery…

view full answer...

Answer 3

The converter has to be wired to the battery so the easiest way to find it would be to go to your battery and trace the wires back from it until you find the converter. Since you'll be replacing your Magnetek 80D distribution panel and PD9100…

view full answer...

Answer 4

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 60 Amps Item #PD9260C and PD9260CV are the same exact power converters. The "V" just means it was packaged for retail with a Converter Status Remote…

view full answer...

Answer 5

Per specs available to me, the Parallax 7400 Series converter charger has a 55 Amp rating. The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger, #PD9260C is a 60-Amp output and confirmed to be a valid replacement. This smart…

view full answer...

Answer 6

First off, congrats on the Scamp, those are great little fiberglass units that last for years. Generally speaking we suggest that electrical wiring, for safety purposes, be done by licensed electricians or certified RV Techs. But as for the items and…

view full answer...

Answer 7

Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement you'll need to reach out to FIC Jack Services directly at 1-877-957-1501. You might consider looking at and…

view full answer...

Answer 8

Both the Alpha Systems 1021 Self-Leveling Sealant for RVs - White - 10.3oz - Qty 1 #AL98KV and the Alpha Systems AlphaThane 5121 Self-Leveling Sealant for RVs - Gray - 9.8oz - Qty 1 #AL45KV are good for use on TPO roofing and will allow you to…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement for Magnetek 30 Amp Convertor

Continue Researching