Replacement Side Rails for Retrax Hard Tonneau Cover On a 2019 Ram 1500 6-1/2 Foot Bed

Question

Question:

does this part fits t80232 retrax also fits 2019 ram 1500 classic. and what does it come with like clumps

asked by: Firas F

0

Expert Reply:

The correct Replacement Side Rails for Retrax Manual Retract Hard Tonneau Covers for a 2019 Ram 1500 with RetraxPRO XR Hard Tonneau Cover part # RTT-80232 is part # RT82232. I spoke with Retrax and they informed me the rails come with clamps as well.

expert reply by: Conner L

0

Answer 1

You are looking for the Replacement Side Rails #RTX45FR for your RetraxPRO XR Hard Tonneau Cover #RTT-80233 that you have on your 2018 Ram 2500 long bed.

view full answer...

Answer 2

I reached out to Retrax and found that you can add the T-slot rails from the RetraxPRO XR to your RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black #RT80362. Doing this upgrades your cover to the XR. The correct rails are the…

view full answer...

Answer 3

I spoke with Retrax and you can indeed replace the rails on your RetraxPRO MX Hard Tonneau Cover #RT80232 with something that has the T slots. As you have a 2012 Ram 1500 with the 6-1/2 foot bed and no RamBox, you will need the Replacement Side Rails…

view full answer...

Answer 4

I contacted the manufacturer and they informed me that you can replace the rails on your Retrax MX cover with XR rails that have the T-slots. If you have a 5-1/2' bed on your 2016 GMC Sierra 1500 then the Replacement Side Rails for Retrax XR…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hi Rusty; the Dexter #84546UC3-EZ and etrailer #AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern…

view full answer...

Replacement Side Rails for Retrax Hard Tonneau Cover On a 2019 Ram 1500 6-1/2 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching