Where Can Winch Mount and Bow Roller Mount on CE Smith Multi Sport Plus Boat Trailer 48870

Published 01/24/2020

Question:

What is the maximum distance between the bow roller and rear of the bunks? I have a 14foot inflatable which is 12foot from the bow to the transom. I want to make sure the boat will fit on the trailer with the transom supported by the bunks and now hanging over the edge. I would also like to use a transom saver connected to the frame of the trailer to keep the motor from bouncing. Do you think this will work?

asked by: Tim

Helpful Expert Reply:

The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870 that you referenced was designed to be used with boats that are up to 14 feet in length like what you have now. I attached a picture that shows the range of where the winch mount/bow roller can sit on the trailer as well. It would easily be adjustable enough to accommodate your boat that has 12 feet from transom to bow eye. The bow roller and winch are also vertically adjustable as well on the mount so you can tailor the height of the winch and roller as needed too.

We don't carry transom savers but you could easily use one on this trailer.

I also attached an assembly and review video for this for you to check out as well.

expert reply by: Jameson C