Parts Needed to Install New Waste Valve and Waste Master RV Sewer Hose

Published 12/31/2019

Products Featured in This Question

Valterra RV Sewer Hose Carrier - Adjustable - 34" to 60" - Black

(379)

$68.13

Valterra ABS Solvent Cement - 1/4 Pint

(216)

$20.49

Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot

(437)

$24.04

Question:

Here is a photo of my current black water pipe. I'd like to add a waste valve for this setup. Hope this helps

asked by: Charles. B

Expert Reply:

Which waste valve you'll need for your black water tank on your RV depends on the fitting that you have on your vehicle currently. As an example, if you have a male threaded hose that fits over the waste valve you'll want to use the Valterra Waste Valve for RV Black Water Tank - 3" MPT to 3" Lug # T50C. I've linked our selection of waste valves to this answer that will allow you to choose the appropriate connection. It is recommended that you use Valterra ABS Solvent # A05-0303 to complete the connections on your sewer lines to make sure that everything is sealed properly.

Once you've got the waste valve chosen and installed you can add the Waste Master RV Sewer Hose w/Cam Lock Fittings # LC360781 to your black water system. I've attached a quick picture that shows how you'll need to cut off the bayonet fittings to install the Cam Lock for the hose to be installed.

In order to carry your new sewer hose, you'll want to use the Valterra RV Adjustable Sewer Hose Carrier # A04-3460BK, which installs by mounting to the frame of your RV; this means you can mount it just about anywhere you need to that has frame access, so it will work well on the rear of your RV.

expert reply by: Erik B

click to enlarge

Charles

12/31/2019

Here is a photo of my current black water pipe. I'd like to add a waste valve for this setup. Hope this helps

Erik B.

12/31/2019

Thank you for the picture! You'll want to use the Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot # T40 which has a 3" Hub slides onto sewer pipe on your camper and the 3" Spigot will allow the Cam Lock on the Waste Master RV Sewer Hose to slide onto it. You will still need to cut the bayonets off of your existing sewer pipe in order to create a flat connection and use the Valterra ABS Solvent # A05-0303 in order to complete your connections.