Dimensions Of Camco Cam Lock Straight or Offset Thumb Operated CAM44333
Updated 11/04/2019 | Published 11/01/2019
Question:
DO YOU HAVE MEASUREMENTS ON THIS PART?
asked by: JEFF W
0
Expert Reply:
I went to the warehouse and measured the cam and the lock for you part # CAM44333. The diameter of the threaded portion of the lock is 3/4". The length of the cam is 2" the portion of the cam that sticks out from the lock is 1" and the depth offset is 3/16". This will fit a door 5/8 of an inch thick. I have added a diagram for your reference.
expert reply by:
Heather A
0
click to enlarge
click to enlarge
Product Page this Question was Asked From
Camco Cam Lock - Straight or Offset - Thumb Operated - 5/8" Thick
- RV Door Locks
- Compartment Door
- Cam Locks
- Offset Cam
- Straight Cam
- 5/8 Inch Long
- Silver
- Camco
more information >
Continue Researching
- Q&A: Troubleshooting a Demco Stay N Play Duo that Won't Activate the Brakes
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: Cylinder Length of Camco Cam Lock # CAM44333
- Q&A: Can the BAKflip MX4 Tonneau Cover be Used W/ a Gooseneck Hitch
- Q&A: Tonneau Cover Recommendation For A 2022 Ford F-250 With A Short Bed And A 5th Wheel Hitch
- Q&A: How Big Of A TV Can Be Used With The MORryde Ceiling RV TV Mount
- Q&A: Replacement LED-Type Rectangular Red Clearance Light for 2001 Newmar RV
- Q&A: Compartment Door Thumb Latch for 1/2" Diameter Hole
- Article: Trailer Maintenance Schedule
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: Best RV Roof Vents
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop