How to Mount the Thermostat in the Camco Propane To Electricity Converter for RV Water Heaters
Updated 10/04/2019 | Published 10/03/2019
Question:
1983 Coachman The tape is not doing the job of holding the thermostat to the tank. Is there any recommendations as to type of adhesive or tape I can use to prevent the thermostat from falling off?
asked by: Chris T
Expert Reply:
I spoke with my contact over at Camco and they said that a trip to your local autoparts store for some 3M trim tape should do the trick. They recommended that you also clean both the tank area that you're trying to attach it as well as the back of the thermostat to make sure that both surfaces are clean and free from dust and debris. He did mention that you won't want to use glue or anything like that since it may get into the components and cause other issues.
Product Page this Question was Asked From
Camco Propane to Electricity Converter for 6-Gallon RV Water Heaters
- Accessories and Parts
- RV Water Heater
- Converters
- Propane to Electric
- Camco
more information >
Continue Researching
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Could Progressive Dynamics RV Breaker Panel Mount Horizontally
- Q&A: Raising Height of 2016 Shasta Phoenix 5th Wheel Trailer for Compatibility with 2019 Ford F-350
- Q&A: Can Progressive Dynamics 4500 Series Distribution Panel Converter Be Used In 96 Winnebago With 2 ACs
- Q&A: What are the Widths of the Equalizers that Come with the Dexter EZ Flex Kit part # K71-656-00
- Q&A: When Installing the Progressive Dynamics PD4560 Can I Re-Use My Circuit Breakers
- Q&A: Can Progressive Dynamics PD4560K18NS2B Power Center Be Used for Lithium Battery Bank
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles