Where Do the Hangers Need To Be When Using the Trailer Hanger Kit APS3 with a 3,500 Lb Axle

Updated 09/18/2019 | Published 09/17/2019

Products Featured in This Question

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear

(378)

$29.43

3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long

(2049)

$38.91

Question:

I have seen answers regarding hanger spacing for 20 3/8 and 25 1/8 length springs but nothing for 23 1/8. I have ordered replacement springs and APS3, hanger kit. I would like to know the manufacturers recommended spacing.

asked by: Larry S

Expert Reply:

If you are using the Single-Axle Trailer Hanger Kit part # APS3 with the 3-Leaf Double-Eye Spring part # e59SR then you will need to install the leaf springs hangers 22-7/8" apart. In regards to spacing front to back, I have attached a help article for you that will help with this.

expert reply by: Conner L