Trailer Hitch Fit for a 2020 Acura RDX A-Spec

Updated 09/17/2019 | Published 09/16/2019

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(97)

$160.33

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(38)

$62.27

Question:

Wanted to make sure this hitch fits the A-Spec model as well. I ask cause the rear end is slightly different on the A-Spec version and wanted to make sure there were no issues.

asked by: Andy B

Expert Reply:

Draw-Tite has no fit exclusions for the A-Spec, so they consider the # 76268 hitch to be a fit. I've spent a bit of time looking at photos of the rear of the standard RDX versus the A-Spec model, and haven't seen too much of a difference. Usually the two factors are a different exhaust or a lowered rear fascia. In doing the eye test, nothing jumped out anything that would prevent the hitch from fitting.

If you'll be towing with your RDX, you'll also need trailer wiring harness # 118804.

expert reply by: Mike L