Brake Controller Port Location on 2019 Coachmen Mirada with Ford F-53 Chassis

Question

Question:

Where is the plug for the wiring adapter. thanks

asked by: Scott M

0

Expert Reply:

The factory brake controller port for your 2019 Coachmen Mirada that's built on the Ford F-53 should be located on the left hand side of the steering column support, which is near the emergency brake pedal. I have attached an image that gives a clearer view of this.

The Plug-In Adapter # 3035-P that you referenced is the correct harness to allow for a plug-and-play install using this port with a Tekonsha brake controller like the Prodigy P2 # 90885 (great choice) that you were looking at.

expert reply by: Chris R

0

click to enlarge

Answer 1

In order to install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 on your Coachman Motorhome with a 2015 Ford F53 chassis, you will use the Tekonsha Plug-In Wiring Adapter #3035-P. One end of the adapter will simply plug into the brake…

view full answer...

Answer 2

The factory trailer brake controller port in your 2020 Fleetwood Flair built on the 2019 Ford F-53 chassis should be located to the left of the steering column near the emergency brake pedal as shown in the included diagram. Now it is possible that…

view full answer...

Answer 3

When plugging in the brake controller adapter part #3035-P on a 2018 Ford F-53 Chassis, the vehicle's wiring harness will not be plugged into any other plug. It will be a dangling free behind a plastic black cover inches to the left of the the…

view full answer...

Answer 4

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

Hey Daniel. To convert your surge brake trailer over to electric over hydraulic system you'll need the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes item #HS481-8067. The Hydrastar item #HS481-8067 works with factory…

view full answer...

Answer 7

Hello Glen, I am glad that you wrote in. Since you have a 18,000 pound rig on a 2014 F-53 Chassis, you will want the Safe-T-Plus Steering Stabilizer with Mounting Hardware Kit - Custom Fit #ST88MR. The red ones are designed for a smaller camper than…

view full answer...

Answer 8

Good question, Rick. The #ST28MR blue and #ST88MR white steering stabilizer are tuned for different F-53 weight ranges. The blue version is for 24,000 lb + GVWR, while the white one fits 16,000–22,000 lb chassis. What’s your coach’s GVWR or model…

view full answer...

Answer 9

Hey Sean, yes you can definitely use a stand alone system like a single-acting hydraulic pump to power a hydraulic trailer jack like the single action Stillwell lineup we just started carrying. For the Stillwell Atlas IV 10K Hydraulic Trailer Jack w/…

view full answer...

Answer 10

To install the Tekonsha brake controller part #TK90160 on your 2003 Ford F-150 will require you to use the install harness part #3035-P. I attached an install video that shows this connector installing a brake controller in a similar 2005 Ford F-150…

view full answer...