Can Over Under Kit Fit 2 inch Square Axle on Trailer

Published 08/30/2019

Products Featured in This Question

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear

(384)

$50.24

CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc

(1031)

$40.89

Question:

I have a boat trailer that is too low to the ground , drags on some boat ramps.i seen that there is a kit to put the axle on top of the springs, but it looks like its for a round axle, I have a 2inch square axle, is there a kit for this, I rather not use the spring hanger kit .any help would be greatly appreciated.

asked by: Bert

Expert Reply:

We have 2 inch square U-bolt kits like part # CE23103 which you could use, but we don't have spring seats for this axle size. So you would have to remove the spring seats on your axle and weld them on the other side and you'd be have an over-under kit that fits your axle. You might have to drill spring seats in the axle.

expert reply by: Jameson C