How to Install Replacement 11" Rotor for Dexter 10K or 12K Disc Brakes
Updated 08/13/2019 | Published 08/12/2019
Products Featured in This Question
Question:
How do you replace the rotors and brake pads
asked by: Juan Q
Expert Reply:
Attached is a photo of how the Replacement 11" Rotor for Dexter Disc Brakes # 070-006-01 that you referenced fits with the hub.
To replace your brake pads # BP04-395 you need to remove the bolts holding the old ones in place, take the cap off of your actuator, then use an old brake pad or some other material with a clamp to push the pistons on the caliper # BP18-045 so that they are flush with the rest of the caliper. Once this is done you can then reassemble the new pads on the caliper and install it all together with the bolts. Be sure to install the new brake pads so they face the same way as the old brake pads.
Product Page this Question was Asked From
Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 10000 lbs
- Rotors
- Dexter
more information >
Continue Researching
- Search Results: dexter rotor
- Search Results: 8~214~8
- Search Results: dexter 10k disc brake kit
- Search Results: 21~36
- Search Results: 8~214
- Search Results: rotor trailer brakes
- Search Results: trailer brakes
- Shop: Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Video: Detailed Breakdown of the Replacement 11" Rotor for Dexter Disc Brakes
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: etrailer High-Low Adjustable Adapter for Tow Bars - 2" Hitch - 6" Rise/Drop - 10K GTW
- Shop: Replacement Brake Drum Mounting Bolt for Dexter Trailer Hub Assembly - 10,000 lbs - Qty 1
- Video: Review of Blue Ox Tow Bar Cover - BLU53QV
- Shop: Curt Venturer NEXT Trailer Brake Controller w/ Plug-In Harness - Up to 3 Axles - Time Delayed
- Shop: Buyers Products Underbody Tool Box for Truck or Trailer - Steel - 60" Wide - 12.1 cu ft
- Shop: Fastway Zip Trailer Breakaway Switch with Coiled Cable - 6' Long
- Q&A: Do You Need To Remove The Hub From A Trailer Brake Assembly To Replace The Rotor?
- Q&A: Replacement Disc Brake Rotor for Dexter 10K/12K Axle
- Video: Review of the Dexter Trailer Idler Hub Assembly for 12,000-lb Axles
- Video: Detailed Breakdown of the Brake Mounting Bolt for 10K, 12K and 15K Brakes
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: Curt Venturer NEXT Trailer Brake Controller w/ Custom Harness Spec Review
- Shop: Brake Controller
- Video: Checking Out the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset
- Video: A Closer Look at the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter
- Q&A: Replacement For Dometic AC 59516.331
- Article: Rooftop Cargo Carriers
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Replacement Disc Brake Kit for Mastercraft Trailer
on Accessories and Parts
