Hole Dimensions for Hopkins 7-Way and 4-Way # HM48470

Published 08/07/2019

Question:

Curious about the dimensions for this connector as Id like to drill a hole in my bumper and mount directly to it. Need to know height with 4-5 pin on bottom, width, depth including cover, and hole size to allow connector to pass through bumper...this should be the same size as the hole in the mounting plate. It would also be helpful to understand the mounting hole dimensions h x w, but I can infer that from total h x w. Thank you.

asked by: James P

Expert Reply:

I attached a picture that has all of the dimensions for the mounting bracket of the # HM48470 for you to check out. You can see that the hole diameter is 2-1/8 inches and the distance between all of the mounting holes which the 7-way would need to attach to.

The overall height and width of the connector is 5.9 inch by 2.9 inch.

expert reply by: Jameson C