Solution for Waste Water Staying in Sewer Hoses on RV

Updated 07/30/2019 | Published 07/29/2019

Products Featured in This Question

Valterra Flushing Hose for RV Sewer System - Gray - 1/2" Inner Diameter - 25' Long

(74)

$24.98

Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses - 3" Diameter

(132)

$48.83

Valterra Flushing Hose for RV Sewer System - Gray - 1/2" Inner Diameter - 15' Long

(74)

$20.82

Question:

I have the rhino sewage hoses from each tank to a rhino y to the 90 4-1 into campsite sewage line. But when I drain the tanks some of the waste water lays in the lines, I do have them angled down towards the campground hook up but the y doesnt lay flat, so thats where the water lays. That being said, will the tee fitting connect to the three hoses directly. Heres a pic of the y connection to the right are the tanks, left is the sewer connection, the one line from the rear of the camper is in a plastic rain gutter and the front tank line is on bricks, if the tee has the right connections for the lines it would lay flat in the rain gutter allowing the water to flow freely, hopefully I havent confused you too much but hopefully the picture will help, thanks

asked by: Robert W

Expert Reply:

What I strongly recommend instead that will fix your problem is the Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses - 3" Diameter # F02-4350 because it is designed for the exact problem you are having. It will flush the hoses so the waste water does not stay the "T" on your photo. It would require you to hook up a hose, Flushing Hose for RV Sewer System # W01-4180 (15 feet) or # W01-4300 (25 feet) but would be the remedy to your issue.

I have added a link to a video review of the Flush King for you to check out.

expert reply by: Kyle S