Center Roller Dimensions of CE Smith Bow Roller Assembly with Bells # CE29334

Question

Question:

Is the center roller actually a full 3 inches wide?

asked by: Robert

0

Expert Reply:

Yes, the center roller of the CE Smith Bow Roller Assembly with Bells # CE29334 that you referenced is 3 inches wide. You can see this measurement as well as other measurements taken in the review video I attached for this as well.

expert reply by: Jameson C

0

Answer 1

The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you have…

view full answer...

Answer 2

Thanks for all of the information you gave me; it makes picking out the correct Fulton XLT winch much easier. Boat-size-to-winch capacity is generally 2 to 1, so basically since your boat weighs 1,700 lbs you could get away with a winch with half of…

view full answer...

Answer 3

I have a solution for you. The Fulton Single Speed Trailer Winch - 10" Long Handle, w/ 20 FT Strap - 1,800 lbs, #F142306, is the winch I recommend for your application. This winch uses a 2-way ratchet system and has a solid drum design which is…

view full answer...

Answer 4

When choosing a replacement bow roller for your boat trailer, you want to measure the width and diameter of your current bow roller. The replacement should have the same width and diameter as your current roller to fit properly. The Yates Bow Roller…

view full answer...

Answer 5

The Fulton High-Performance 2-Speed Trailer Winch part #F142412 is the perfect replacement for a Shelby 5460A. It has a two speed operation just like your old winch and a bit higher capacity as well at 2,600 lbs compared to the 2,300 lb capacity of…

view full answer...

Answer 6

We definitely have a boat winch that is capable of winching your 5,000 lb boat. I recommend the 3,200 lbs Fulton XLT, 2-Speed Trailer Winch part #F142425 which will be more than enough to winch the 5,000 boat trailer as long as you have good rollers…

view full answer...

Answer 7

Hey John, It looks like we don't offer that specific tire size so we wouldn't be able to offer you just a spare. If you wanted to switch out your wheels/tires completely and get an extra spare then the closest option with a 4 on 4 wheel bolt…

view full answer...

Answer 8

The best part about boat trailers is that everything is universal so a lot of the parts you add to them are about preference and have to do with the type of boat you're carrying. I recommend checking out the CE Smith Bow Roller Assembly with…

view full answer...

Answer 9

The closest thing we have to what you're looking for is the CE Smith U-Bolt #CE15274A. This is 4-1/4" Long x 3-1/8" Wide x 1/2" Diameter. Aside from that the next best thing is the CE Smith U-Bolt #CE15260A which is 6" Long x…

view full answer...

Answer 10

With two brown wires in your photo it indicates a wishbone harness basically allowing running lights to be sent to each side from the coupler location instead of using a jump wire from one side to the other. This is very common to use with boat and…

view full answer...

Answer 11

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

view full answer...

Center Roller Dimensions of CE Smith Bow Roller Assembly with Bells # CE29334

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching