Will LaSalle Bristol RV Sewer Termination Adapter Connect to 3" PVC Pipe
Updated 06/24/2019 | Published 06/21/2019 >
Products Featured in This Question
Question:
I am wondering if this will connect with pipe glue of course to a 3inch PVC pipe. I am building a drain to my septic tank and need it to connect to a flex RV sewer line on the drain end so I do not have a pipe permanently in my septic tank. thanks.
asked by: Jim
Expert Reply:
The LaSalle Bristol RV Sewer Termination Adapter # 34466V293B3S is designed to slide into a larger hub like what you see on the end of # T1028 and secured using ABS Solvent Cement # 3447530889. The inner diameter on the hub should be about 3-1/2 inches. If this is what is on the PVC pipe that you mentioned then it will work great.
I don't recommend connecting it directly to another 3 inch diameter PVC pipe though, as this might not allow for the best connection even when using a healthy dose of solvent cement and you don't want to risk failure down the line.
Product Page this Question was Asked From
LaSalle Bristol RV Sewer Termination Adapter - 3" Lug Fitting to 3" Spigot
- RV Sewer Hose Fittings
- Sewer Adapters
- Termination Adapters
- Lug
- Spigot
- Sewer Hose to Slip Hub
- 3 Inch Diameter
- 3 Inch Diameter
- LaSalle Bristol
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Are the Valterra Waste Valves Directional as Far as Direction of Flow?
- Q&A: Is There a Difference Between the Valterra Double RV Waste Valves and Bristol Double RV Waste Valves
- Q&A: Recommended Replacement Stereo for Jensen AWM970
- Q&A: Looking For Circuit Board For MaxxAir vent Fan In A 2021 Entegra Cornerstone
- Q&A: Recommended Replacement For A Suburban SW6 DE RV Water Heater
- Q&A: Are There Installation Differences Between LaSalle Bristol, Valterra, And Camco Wastewater Valves
- Q&A: Replacement Slide Out Motor for 2003 Fleetwood Prowler 27
- Article: What are the Common Types of Propane Fittings Used on RVs?


