How To Reset the Rain Sensor On a Fan-Tastic Vent Roof Vent

Updated 01/13/2025 | Published 06/17/2019

Question:

Will the rain sensor reset once it has been disabled or do I do that?

asked by: Wayne

Expert Reply:

Yes, the rain sensor will reset once disabled but you will want to open and close the lid a few times in order to be sure everything has cleared. In order to disabled the rain sensor you will need to hold the up/down arrow on the remote part # FV9068-09 for three seconds until you see the light illuminated under the "Rain Sensor Off" label. In order to then enable the rain sensor once again you will need to hold the up/down arrow on the remote for three seconds until you see the light illuminated under the "Rain Sensor Off" label disappear.

expert reply by: Conner L

Matt

1/12/2025

Hi, My rain sensor lights won’t illuminate and the fan wants to open but won’t….. any thoughts? Matt

Jerred H.

1/12/2025

@Matt What model fan do you have and have you tried resetting it?

Matt

1/13/2025

@JerredH I did the hold up/down arrows but nothing. Model # for operator is 5300 No sure as I have auto lift/rain sensor but no thermostat. Model # is not in my literature. 2016 Jayco Pinnacle FBTS Thanks