Trailer Leaf Spring Recommendation for Hanger Spacing of 30 inches with 8 inch Equalizer
Updated 05/28/2019 | Published 05/25/2019
Question:
I have a hanger tandem hanger spacing of 30 inches with an 8 inch eq What lenth spring do i need
asked by: Bruce E
0
Expert Reply:
Based on what you mentioned you'd want a leaf spring right at 26 inches in length.
You didn't mention what style of leaf spring you have so I attached a page that has all of the ones we carry that you can check out. You'll need to select the style of spring, the capacity and the length needed.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 12 Inch Long
- Tandem Axle
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bushings and Wet Bolts for Slipper Springs.
- Q&A: Replacement Grease Seal for Trailer Hub that is Marked 171255
- Q&A: Looking for a 12" Slipper Spring Equalizer, and Heavy Duty Shackle Kit for My Tandem Axles?
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Suspension Enhancement For A Trailer With 8,000 Pound Axles
- Q&A: Recommended Wet Bolt for 2 Inch Wide Equalizer Slipper Springs
- Q&A: Recommended Replacement Cylinder Kit for a Dexter Hydraulic Drum Brake Kit
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)