Best Fit Bolt-On Shock Kit for a 2019 Palomino Puma 5th Wheel Trailer
Updated 05/15/2019 | Published 05/13/2019
Products Featured in This Question
Question:
i was told that i need 4 inch clearance between tire and frame edge, i have only 3 inches. that is mounting the shocks outward. an expert at monroe said i should be able to mount the 281281 kit inward and have no clearance problem. what do you think. i was also told that if mounting outward i could you wheel spacers. i have an i beam frame, what do you think about notching the frame by the shock for clearance. i would really like to use this 281281 kit. i have a 2019 puma fifth wheel trailer with 3 inch axle. any ideas?
asked by: Al S
Helpful Expert Reply:
For your 2019 Palomino Puma 5th Wheel Trailer, I recommend you use the Roadmaster Comfort Ride Shock Kit part # RM-2460-50 instead of the Lippert Components Bolt-On Shock Kit part # LC281281. The reason for this is because the Roadmaster Kit is designed to be mounted on the inside and to the bottom of the frame rail. Therefore, you won't have to worry about the minimal frame to tire clearance that you have now.
Unfortunately, I cannot advise on notching the frame, using wheel spacers, or installing the Lippert Components Bolt-On Shock Kit against what Lippert recommend. These are unnecessary risks to take when there is a kit available that will work for you without any major modifications.
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- Single Axle
- Lippert
more information >
Continue Researching
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Shop: Replacement Upper Mounting Bracket for Lippert Gas Shock Kit - Qty 1
- Search Results: self tapping screws
- Search Results: lc281281
- Video: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks Review
- Video: Breaking Down the Replacement Shock Mounting Plate for Lippert Components Gas Shock Kit
- Shop: Replacement Shock Mounting Plate for Lippert Components Gas Shock Kit - 2-3/8" Axle - Qty 1
- Shop: Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Shop: Roadmaster Comfort Ride Add-On Kit for Triple Axle Trailers - 3,500-lb Axles
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Q&A: Best Way To Supplement Trailer Suspension That Bottoms Out Under Heavy Loads
- Q&A: Suspension Enhancement For 2019 Grand Design Solitude 5th Wheel Camper
- Q&A: Mounting Bracket Dimensions for Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks
- Q&A: Do Trailer Suspension Shock Kits Work Well if Shock is At Angle
- Q&A: Can Top Bracket for Lippert Bolt-On Shock Kit Be Cut to Ensure 45 Degree Angle on Shocks
- Q&A: Can Lippert Shock Kit be Used With Axle on Top of Springs
- Q&A: Measuring Axle for Proper Shock Absorber Kit