Flatbed Hitch Plate That Fits 2000 Chevy C6500 with Flat Bed Dump

Question

Question:

I have a 2000 c6500 with a 16 FLATBED dump will this work?

asked by: Randy

0

Expert Reply:

Yes, the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount # 3371809050 that you referenced does fit the flatbed/dump bed you have on your 2000 C6500. According to Buyers Products this fits your chassis but will require some drilling.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item #3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want the Buyers Products Flatbed/Flatbed Dump Hitch Plate…

view full answer...

Answer 2

The Buyers Products hitch #3371809050 that you referenced would fit a 1995 Ford F-350 with a dump bed as this fits the standard 34 inch frame of trucks that have dumb beds. These trucks are commonly sold as cab and chassis models which all have the…

view full answer...

Answer 3

If your 2000 Ford F-350 dually is a cab and chassis model that has a frame width of 34 inches measured from outside to outside yes the Buyers Products Hitch Plate #3371809061A would fit and work well as that's what it was designed to fit.

view full answer...

Answer 4

I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…

view full answer...

Answer 5

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

view full answer...

Answer 6

Hey Tim, We have a few options based on whether your F-450 is 2WD or 4WD: 2WD SS #SS94VR - 1,400lb capacity SS #SSA22 - 2,500lb capacity SS #SSA17 - 5,000lb capacity 4WD SS #SSA25 - 3,400lb capacity SS #SSA26 - 6,800lb capacity I always recommend…

view full answer...

Answer 7

The Redline Replacement Key #CHK545 should be the correct key for the lock cylinder that is on your existing T-handle. This key is designed for T-handle locking door latches like what you have and the number matches up to the CH545 number you found…

view full answer...

Answer 8

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

view full answer...

Answer 9

I was able to get the dimensions you were looking for of the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount #3371809050. Overall it measures 62 inches wide x 13 inches tall x 22 inches deep; also from the top of the…

view full answer...

Answer 10

Yes we do; I have added a photo below for you of the dimensions of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A.

view full answer...

Answer 11

Hi Cody; Buyers Products was unable to confirm if the #3371809060A could fit your 1990 Ford F-Superduty. What you can do is look at the measurements below to see if they line up with what you have. If not, you could use one of the following universal…

view full answer...

Answer 12

Based on the information I could find on your 2011 Freightliner M2 cab and chassis it appears you have a 34" wide frame. The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper #3371809050 is specifically designed to fit a 34" wide…

view full answer...

Flatbed Hitch Plate That Fits 2000 Chevy C6500 with Flat Bed Dump

Product Page this Question was Asked From

Continue Researching