Are Replacement Parts Available for Kwikee Steps Made in 1989

Updated 05/08/2019 | Published 05/07/2019

Products Featured in This Question

Replacement Control Unit for Kwikee Electric RV Steps

(174)

$164.22

Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide

(337)

$759.63

Question:

I have a 1989 series 3218 steps that i have replaced the motor and gear assembly with a 366043 motor motor made in 2016, The assembly works fine when you power the motor directly. But the old controller although working will not drive the new motor. I think in need a new controller and may also need to change out the door switch. I think the Lippert 379146 Kwikee #9519 IMGL/9510 will work as a replacement. Can you verify that or let me know what other controller I will need

asked by: James W

Expert Reply:

I do have options for you but the cutoff date for replacement parts on Kwikee Steps is 1999. I spoke with Lippert and they said you most likely have a pre pre-IMGL step in which case none of the control modules will work for you. If it turns out you instead have a pre-IMGL 1999 or later model then you can use the Lippert Components Kwikee 9510 Control for IMGL/9510 Step Control part # LC379146 but if not your only option would be to replace the steps altogether. If you can get me your part number and serial number (see photo) then I can confirm this for you.

For replacement steps, I recommend the Lippert Kwikee 32 Series Electric Step part # LC372261 which fits a 25-1/4" wide mounting bracket and comes with a new motor, control unit, and switch kit.

expert reply by: Conner L