Is There an Equa-Flex Equalizer Kit that Fits 2015 Eclipse Attitude 32SAG
Published 06/05/2019
Products Featured in This Question
Question:
Thanks! How do I order? Through you? Lastly, looking for bearing seals for a Lippert axle 6k. Vooo115110. Can you help with these?
asked by: Brent R
Expert Reply:
The best way to determine if the Equa Flex kit part # LC279688 you referenced is going to fit is to compare it's dimensions to the dimensions of the equalizers you currently have. If they are the same or very close then they will work. I attached a picture of the dimensions of this for you to check out as well.
If you have dimensions that are different let me know what you have and I'll see what the best option is.
Product Page this Question was Asked From
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 7-1/2 Inch Long
- Tandem Axle
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will 8k Leaf Springs Lift Trailer With 7k Axles
- Q&A: Upgraded Leaf Spring to Replace a 25-1/4" Long Dexter 072-078-00
- Q&A: What is Needed to Upgrade From 3,500 lb to 5,200 lb Axle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Determine Correct MORryde CRE3000 Equalizer Upgrade
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Q&A: Recommended Equalizer for a Tandem Axle Trailer w/ Two 3,500 lbs Axles
- Q&A: Is There Any Way to Control The Middle Jacks On The Lippert Ground Control 3.0 Independently?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Wiring Diagrams
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: What are the Common Types of Propane Fittings Used on RVs?
Brent R.
5/28/2019
Jameson, sorry for delay. Measurements horizontal are approx 5 and 11/16th Vertical is approx 2in Upper eye approx 7/16 very approx Lower eye in red 1 and 3/4.