Flexible Brake Line For Fold Away Coupler Hinge Kit

Updated 04/22/2019 | Published 04/20/2019

Products Featured in This Question

Dexter Hydraulic Brake Line with Fittings - 25" Long

(66)

$64.64

Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 3.5'

(56)

$37.31

Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 6'

(79)

$61.24

Question:

I want to install this on my trailer. From the tongue to the pivot point is going to be 22 inches. I also have surge brakes. My length would i need for a flexable brake line and part #. Thanks

asked by: Joseph M

Expert Reply:

I recommend Titan 25 inch Hydraulic Brake line part # T0980100 to use with the Fulton Fold-Away Coupler Hinge kit. The 25 inches is LIKELY long enough because the line attaches to the back of the actuator at the master cylinder and gives you enough slack to not put stress on the rest of the brake lines when the coupler is folded in. Its always better to have a little bit of slack in the brake line when installing the folding tongue for that reason.

If you need a longer line, I recommend Kodiak 3-1/2 foot Flexible Brake Hose part # BH-3MFS-3-5.

expert reply by: Heather A