Does Reservoir of RoadMaster BrakeAway Kit for BrakeMaster Have Specific Mounting Location
Updated 02/27/2019 | Published 02/26/2019 >
Products Featured in This Question
Question:
I have a 2016 Ford C-Max that I am setting up for Flat Tow. My previous flat tow vehicle was a 2010 Jeep Liberty. My Motorhome is a Monaco Diplomat. My question is on the Supplemental Brake System, I already have the RM9100 that I used with my Jeep, however I was not using a Brake Away System, which I now want to install. The instructions look straight forward, but I have 2 questions. First, can you recommend a good location to install the Reservoir in the engine compartment of a C-Max and 2, do I need a brake pressure equalizing valve / pressure reducer, etc with a C-Max.
asked by: Lee R
Expert Reply:
It is definitely a smart idea to use the BrakeAway Kit # RM-8600 with your Roadmaster BrakeMaster although there is not necessarily a recommended spot we can offer to install the reservoir in a 2016 Ford C-Max. We have not had a chance to install this specific part in this specific vehicle, but I took a look at the owner's manual and since the air lines do need to be two feet away from a heat source like the engine, your best bet is off to the right (if you are facing the front of the car). The manual's diagram was top-down though so you'll need to check the amount of space in that compartment.
In regards to the RoadMaster Brake Pressure Reducer for BrakeMaster # RM-900002, that is only designed for vehicles with active or continuous power assist brakes, and it does not look like a 2016 Ford C-Max uses those type of brakes, though you will want to verify this.
There are a couple parts you are going to need with your BrakeMaster, the Roadmaster Stop Light Switch Kit - Ford # RM-751459 and the Roadmaster BrakeMaster Custom Seat Adapter # RM-88295. I have added a link to a video install of the Stop Light Switch Kit on a C-Max for you to take a look at as well as a link to a review of the Seat Adapter.
Product Page this Question was Asked From
Replacement Roadmaster Breakaway Kit for BrakeMaster Flat Tow Brake Systems
- Accessories and Parts
- Flat Tow Brake System
- Breakaway Kit
- Roadmaster
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Blue Ox Baseplate do I Need for My 2025 Ford Bronco Heritage with Capable Steel Bumper?
- Q&A: Parts Needed To Flat Tow 2025 Ford Bronco Outer Banks With Blue Ox Tow Bar
- Article: Beginner's Guide to RV Awnings: How to Open, Close, and Maintain Your Awning
- Q&A: Is there a Plug In Wiring Harness for Flat Towing a 2024 Ford Bronco?
- Q&A: Is a Fuse Bypass Needed to Flat Tow a 2016 Lincoln MKX and What is the Flat Towing Procedure
- Q&A: Can Brakemaster Second RV Kit 98200 Be Installed at Home
- Q&A: Brake Controller Wiring Harness on 2026 Ford F-250 WT
- Q&A: Mounting Guidelines for the Roadmaster BreakAway Air Cylinder
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2016-2017 Ram 1500
- Article: What Is a Supplemental Braking System?
- Article: Can You Flat Tow a 2025 Chevy Tahoe?
- Article: How to Choose a High-Low Adapter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)



