Does the Erickson E-Track with Tie-Down Strap Meet DOT Standards
Updated 01/02/2019 | Published 12/30/2018
Question:
Is item # EM58523 D.O.T. approved??
asked by: Mike
0
Expert Reply:
I spoke with my contact at Erickson who confirmed that the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet # EM58523 that you referenced does meet the DOT standards! This has a safe working load limit (WLL) of 1,100 lbs so you just need to make sure to use enough straps to accommodate the weight you will be carrying.
Attached is a review video for you to reference as well.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs
- Car Tie Down Straps
- E Track Ends
- 11 - 20 Feet Long
- Ratchet Strap
- 1500 lbs or Less
- Erickson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended E-Tracks and Straps for Towing a 4,000 lbs Car
- Q&A: Installing E-Track on an Aluminum Trailer
- Q&A: Should Erickson E-Track be Installed Directly Under Tires of Vehicle
- Q&A: Could the E-Track Wheel Straps Be Used on Tracks That are too Narrow/Wide for Vehicle Wheels
- Q&A: Differences Between Different Brands of E-Track
- Q&A: Will Wheel Designed For 1/2 x 20 Wheel Stud Work With M12x1.25mm Wheel Stud?
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-Track
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Dump Black and Gray RV Waste Tanks
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: Finding the Right Electric Winch
- Article: Can You Flat Tow a Jeep Compass?
- Article: Determining Trailer Tongue Weight