Bearing Buddy Recommendation for Hub with Dimension Near 2.468 inches
Updated 12/17/2018 | Published 12/16/2018
Products Featured in This Question
Question:
I measured the inside dimension of my boat trailer hub with an admittedly not a great measuring instrument at 2 15/32inch or 2.468. Is there an obvious match size bearing buddy and dust cap that would fit or do I need a better measuring device. I previously bought 2.328 ID bearing buddies and they were to small.
asked by: George T
0
Expert Reply:
The closest Bearing Buddy to what you measured would be the one for a bore of 2.441 inches like the # BB2441SS. Most likely this is what you'd need but you might measure with a caliper like # PTW80157.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
- Article: Trailer Maintenance Schedule
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub