Mounting Hole Dimensions for Pacer Performance Hi-Five LED Light Kit # PP20-236

Updated 12/10/2018 | Published 12/08/2018

Question:

I have a 2002 f250 super duty with factory cab lights . I would like to install the led lights . My question is : are the mounting holes and hole for the wires the same? Thank-You

asked by: Les W

Expert Reply:

The Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-236 referenced in your question is designed to look like the factory cab lights on your 2002 Ford F-250 but I can't be certain if the mounting holes are the same as what you have. I went out to our warehouse to take a look at the lights and I measured a distance of right at 1-3/4 inches between the two mounting holes, on center. The larger hole for the wiring is centered between them.

The overall dimensions of the light are 4 inches long, 3 inches wide, and 1-3/4 inches tall.

I have attached an image with this dimension labeled that you can also check out. I recommend comparing this to the existing lights on your truck to see if you will need to drill any new holes. The installation manual that is included features a convenient cut-out diamgram that you can use as a template when drilling if needed.

expert reply by: Chris R