Hitch Extension for Use With Truck Camper

Updated 11/06/2018 | Published 11/05/2018

Products Featured in This Question

TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long

(374)

$675.17

Curt Extender for 2" Hitch Receivers -18" Long

(244)

$91.81

Question:

I need a hitch extension to go under my slide-in pickup camper. Looks like an 18 inch extension will work. I will be pulling a small trailer bed size 50X10 with a Polaris 570 RZR on the trailer. The RZR weighs about 1050 lbs. Question: Should I be looking for an 18 inch extension that uses chains to the corners of my truck hitch? Thanks for your help.

asked by: Steve S

Expert Reply:

By extension that "uses chains to the corners of my truck hitch" I assume you are talking about an extender such as the TorkLift SuperTruss Hitch Extension # TLE1521 which attaches like in the accompanying photo.

The SuperTruss extenders that use chains are only fits for TorkLift SuperHitch dual-receiver trailer hitches so these would only fit if you had one of those on your truck.

As for 18" hitch extenders such as the Curt # C45796, there are none we carry which use chains that attach to the corner of your truck. It is also very important to note that it has a capacity of 350 lbs tongue weight and 3,500 lbs towing OR they will reduce the capacity of your trailer hitch by 50 percent, whichever is lower.

So if your current hitch is rated for 600 lbs tongue weight and 6,000 lbs of towing, using the Curt # C45796 will reduce it to 300 lbs of tongue weight and 3,000 lbs towing.

expert reply by: Kyle S